Price: $55.99
Enhanced 3D NAND Performance: Boosted Sequential Read Speeds Reaching 550MB/s and Write Speeds up to 500MB/s, Leveraging Advanced SLC Cache Technology for Enhanced Efficiency and Extended Durability.
Boasting an Impressive Industry-Leading Mean Time Before Failure (MTBF) of 1,500,000 Hours.
Fully Compatible with a Range of Operating Systems, Including Windows 11, Windows 10, Windows 8.1, Windows 8, Windows 7, and Linux 2.6.33 or Later Versions.
Seamless Integration with Desktops and Laptops Supporting M.2 2280 SATA III 6Gb/s SSDs, with Backward Compatibility with SATA II 3Gb/s and SATA I
Micron Presents the Premier SATA SSD for Data Centers with Cutting-Edge Technology
The Micron 5400 SATA SSD emerges as the pioneer in the global market, being the initial 176-layer SATA SSD specifically designed for data centers.
Leveraging the robust and time-tested architectural backbone drawn from Micron's extensive SATA expertise spanning over 11 generations, this SSD offers a seamless blend of contemporary NAND technology and established reliability.
Customers can now reap the benefits of both worlds, enabling them to build SATA-based servers equipped with the most sophisticated data center technology available.
Price: $25.00
【Remarkable Capability】 The SSD hard disk excels in delivering outstanding performance with its swift read and write speeds.
Furthermore, its sustained read and write capabilities have been significantly enhanced, offering a superior experience.
By leveraging this impressive solid state disk, users can enjoy faster file transfers and software startups.
【Robust Reliability】 This multifaceted internal SSD boasts a range of features that contribute to its high stability.
It supports bad block management, TRIM command, garbage collection technology, the S.
M.A.
R.T monitor system, and ECC technology (error checking and correction).
These features collectively enhance the reliability of data read-write operations, ensuring smooth and secure performance.
The 3D NAND SATA SSD offers enhanced reliability with capacities extending up to 4TB. industrial ssd
| In terms of storage capacity, 1 terabyte (TB) equates to 1 trillion bytes, and the actual accessible capacity may vary based on the operational conditions.
| The sequential read speeds can reach up to 560MB/s, while the sequential write speeds can attain a maximum of 530MB/s.
| For transfer rate or interface measurements, megabyte per second (MB/s) represents 1 million bytes per second, and gigabit per second (Gb/s) signifies 1 billion bits per second.
| This SSD boasts an impressive 1.75M hours mean time to failure (MTTF),
Price: $60.88
The VisionTek DLX4 M.2 NVMe SSD incorporates advanced features that cater to the demands of PC users seeking ultrafast and dependable storage solutions.
Among these features is the support for PCIe Gen4 x4, which ensures high-speed data transfer rates.
Additionally, it boasts NVMe Deallocate function support, analogous to the TRIM command in traditional storage systems, optimizing the usage of storage space.
Moreover, the SSD offers Host Memory Buffer (HMB) support, which is contingent upon the operating system, enhancing system performance.
The VisionTek DLX4 M.2 NVMe SSD also incorporates S.
M.A.
R.T.
(Self-Monitoring, Analysis, and Reporting Technology) support, providing valuable insights into the health and performance of the drive.
Furthermore, compliance with NVMe Protocol 1.4 ensures compatibility with a wide range of devices and systems.
As the industry shifts from hard disk drives to solid state drives, the VisionTek DLX4 M.2 NVMe SSD offers a seamless drop-in replacement option for M.2 NVMe-based systems, delivering exceptional performance and reliability.
Price: $77.00
The VisionTek DLX4 M.2 NVMe SSD incorporates advanced features that cater to the demands of PC users seeking ultrafast and dependable storage solutions.
Among these features is the support for PCIe Gen4 x4, which ensures high-speed data transfer rates.
Additionally, it boasts NVMe Deallocate function support, analogous to the TRIM command in traditional storage systems, optimizing the usage of storage space.
Moreover, the SSD offers Host Memory Buffer (HMB) support, which is contingent upon the operating system, enhancing system performance.
The VisionTek DLX4 M.2 NVMe SSD also incorporates S.
M.A.
R.T.
(Self-Monitoring, Analysis, and Reporting Technology) support, providing valuable insights into the health and performance of the drive.
Furthermore, compliance with NVMe Protocol 1.4 ensures compatibility with a wide range of devices and systems.
As the industry shifts from hard disk drives to solid state drives, the VisionTek DLX4 M.2 NVMe SSD offers a seamless drop-in replacement option for M.2 NVMe-based systems, delivering exceptional performance and reliability.
Price: $109.99
ECC Capability: Integrated Hardware LDPC ECC engine, offering 120-bit/1KB correction capability, alongside Block/Page RAID functionality; MTBF: Exceeding 3 million hours at 25°C, calculated using MIL-HDBK-217F part count method in accordance with Telcordia SR-332 Method; Program / Erase Durability: Enduring up to 3,000 Program/Erase cycles; Maximal 4K Random Access Performance: Achieving 85,000 IOPS for write operations; TBW Data Estimation: Client use cases yield an estimated 1456 TB, while Enterprise scenarios predict 404 TB; Optimal Performance Sustainability: Leveraging Direct-To-TLC and SLC Cache Architecture; Data Endurance & Integrity Assurance: Enhanced by StaticDataRefresh technology, proactive weak block retirement, and comprehensive Global Wear leveling; Data Ret
Popular articles
Hot Tags
Popular articles
© All rights reserved Copyright.