Hot Search Terms

vacuum cleaner

More and more families like to use carpets to decorate their living room floors! But in life, carpets are not easy to take care of. When the carpet becomes dirty, it not only has no decorative effect, but also looks dirty,wireless vacuum cleaner suppliers affecting the appearance! Today, we have summarized a super comprehensive carpet cleaning guide to share with you!

1. Vacuuming

Vacuuming is the most basic task for carpet maintenance. The carpet vacuum system should vacuum twice,electric mop vs carpet washing cleaner machine the first time against the carpet pile. This will not only help to suck out the dust inside the carpet! The second pass along the carpet pile suction will help restore the carpet pile to its original shape and avoid confusion in the direction of the pile, causing obvious color differences between carpets. What we need to pay attention to is that no matter how many times you suck it, you should be able to suck it along the pile with the last pass.

2. Cleaning

Regular carpet cleaning can restore the original brightness of the carpet, protect the color of the carpet,multi use carpet cleaning machine and extend the service life of the carpet. Commonly used carpet cleaning methods are divided into two categories, one is dry cleaning and the other is wet cleaning. Whichever way you choose, you should use the right method! Prevent carpet damage.

dry cleaning

Foam dry cleaning: It is the most common type of carpet that forms foam on the surface for cleaning. The foam dry cleaning machine uses a rotating brush and an implanted wet vacuum nozzle to spray mass-produced detergent on the carpet surface pile. On the machine, under the action of the rolling brush, the detergent develops and cleans the pile, and then a vacuum suction machine is used to absorb the washing foam and suspended dust.

Dry extraction: This method is to spray a mixture of solvent, emulsifier, water and detergent on the carpet surface by hand or by dispensing a container. After 30 minutes of rotational cleaning, it is brushed into the carpet pile with washing equipment, and the carpet surface can be passed through Dry cleaning removes detergent and dust, but dirt deep within the carpet cannot be removed and requires a thorough cleaning.

wet cleaning

When the oil stains and other sticky substances in the carpet are obviously accumulated, the dirt is seriously accumulated, which has a serious impact on the low-carbon color and fluff, and the adhesion is serious and dry cleaning cannot restore the original appearance, the carpet should be wet cleaned, that is, thoroughly cleaned.

Spray cleaning method: This method is to spray hot water and detergent onto a carpet under pressure. Under the action of water and detergent, the carpet is cleaned using technical equipment equipped with different rotations or oscillations or brushes. The dirt is separated and cultured from the fibers and then sucked away.

Steam cleaning method: This is a method of embedding piles into the carpet. It is very effective in removing dirt and grime on the surface of the carpet. It is the most thorough cleaning method for washing carpets. Also called extraction cleaning method. A special steam dry carpet cleaning machine is used to release water and cleaning fluid mixed with the steam solvent sprayed on the carpet. After stirring with the mechanical swing brush, the dirt is separated from the carpet fibers, suspended in the solvent, and removed through the implanted vacuum suction head.

That’s all there is to know about carpet care and cleaning. In order to use the carpet as much as possible, it is still recommended that you try not to stain the carpet in your daily life. Reducing the number of cleanings will also extend the service life of the carpet!

www.tops-article.com

© All rights reserved Copyright.